Applications:
Medical Adhesives
Dental Adhesives
Audiology Adhesives

Features:

Complete Flexibility

Use almost any manufacturer’s material packaged in 50 ml dual component cartridges
Models are available for standard (rectangular flange) or new (rounded flange) cartridges, The PowerPush 7500 supports 1:1, 2:1, 3:2, and 4:1 mix rations in the 50ML capacity.

Speed Control

The PowerPush 7500 gives you complete control over the dispense speed of the highest viscosity materials, it can dispense materials up to 1 million cps at rates up to 1ml / second.

No Strain trigger

Using the Powerpush 7500 is easier on your hands as well, instead of squeezing the material with a manual dispenser the material flows with ease by depressing the trigger. This reduces operator strain and improves productivity by eliminating excessive hand strain.

True Portability

The PowerPush 7500 lets you work anywhere with the power of a NiMH rechargeable battery pack, it can also run off an A/C power adaptor.

Flow Control

The combination of effortless dispensing and Drip-Free operation makes it possible to accurately dispense a straight or curved bead where required.

Drip-Free knob

The Drip-Free feature significantly reduces or even eliminates oozing from the mix-tip upon release of the trigger.

Dimensions and Weight

1.75lbs
7.25 x 7.25 inches (without cartridge)

Battery Pack

The PowerPush 7500 includes a rechargeable, 7.2 volt nickel metal hydride (NiMH) battery. Since NiMH batteries have no “memory” build=up they can be charged whenever necessary without having to fully discharge the battery first.

Every PowerPush 7500 also ships with an A/c adaptor allowing the unit to be optionally powered from a standard 110V electrical outlet.  The A/C adaptor doubles as the battery charger, just leave the PowerPush 7500 plugged in overnight to fully charge the battery pack.

Configurations:

Applications:

Automotive Adhesives – Assembly, repair, Autobody
Industrial Adhesives
Electrical Adhesives
Marine Adhesives
Aerospace Adhesives

Features:

Complete Flexibility

Use almost any manufacturer’s material packaged in 50 ml dual component cartridges
Models are available for standard (rectangular flange) or new (rounded flange) cartridges, The PowerPush 7500 supports 1:1, 2:1, 3:2, and 4:1 mix rations in the 50ML capacity.

Speed Control

The PowerPush 7500 gives you complete control over the dispense speed of the highest viscosity materials, it can dispense materials up to 1 million cps at rates up to 1ml / second.

No Strain trigger

Using the Powerpush 7500 is easier on your hands as well, instead of squeezing the material with a manual dispenser the material flows with ease by depressing the trigger. This reduces operator strain and improves productivity by eliminating excessive hand strain.

True Portability

The PowerPush 7500 lets you work anywhere with the power of a NiMH rechargeable battery pack, it can also run off an A/C power adaptor.

Flow Control

The combination of effortless dispensing and Drip-Free operation makes it possible to accurately dispense a straight or curved bead where required.

Drip-Free knob

The Drip-Free feature significantly reduces or even eliminates oozing from the mix-tip upon release of the trigger.

Dimensions and Weight

1.75lbs
7.25 x 7.25 inches (without cartridge)

Battery Pack

The PowerPush 7500 includes a rechargeable, 7.2 volt nickel metal hydride (NiMH) battery. Since NiMH batteries have no “memory” build=up they can be charged whenever necessary without having to fully discharge the battery first.

Every PowerPush 7500 also ships with an A/c adaptor allowing the unit to be optionally powered from a standard 110V electrical outlet.  The A/C adaptor doubles as the battery charger, just leave the PowerPush 7500 plugged in overnight to fully charge the battery pack.

Configurations:

Technical Specifications:
• Capacity: 16.7oz
• Ratio: 10:1 (450x45ml)
• Weight: 8.6 lbs (3.9 kg)
• Dimensions: 15.1 x 3.9 x 13.4” (384 x 100 x 341mm)
• Thrust: Factory set up to 1,800 lbs (8kN)
• Speed: Variable up to 6”/min (2.5mm/sec)
• Battery: 14.4V NiCd or 14.4V NiMH
• Charger: One hour quick charge 110V (240V model available)
• Battery Capacity: Up to 30 cartridge sets (material dependent)
• Dosing Limits: Variable from 3 to 32 seconds
• Top load – drop in cartridge holder

Cartridge Compatibility:
• Nominal Size: 495ml
• L Dimension: 183mm
• A Capacity: 450ml
• B Capacity: 45ml
• Ratio: 10:1
• D1 Dimension: 20mm
• D2 Dimension: 65mm
• Strap Hook

Technical Specifications:
• Capacity: 13.5oz
• Ratio: 4:1 (340x85ml)
• Weight: 8.6 lbs (3.9 kg)
• Dimensions: 15.1 x 3.9 x 13.4” (384 x 100 x 341mm)
• Thrust: Factory set up to 1,800 lbs (8kN)
• Speed: Variable up to 6”/min (2.5mm/sec)
• Battery: 14.4V NiCd or 14.4V NiMH
• Charger: One hour quick charge 110V (240V model available)
• Battery Capacity: Up to 30 cartridge sets (material dependent)
• Dosing Limits: Variable from 3 to 32 seconds
• Top load – drop in cartridge holder

Cartridge Compatibility:
• Nominal Size: 400ml
• L Dimension: 183mm
• A Capacity: 340ml
• B Capacity: 85ml
• Ratio: 4:1
• D1 Dimension: 29mm
• D2 Dimension: 57mm
• Strap Hook

Technical Specifications:
• Capacity: 13.5oz
• Ratio: 2:1 (270x135ml)
• Weight: 8.6 lbs (3.9 kg)
• Dimensions: 15.1 x 3.9 x 13.4” (384 x 100 x 341mm)
• Thrust: Factory set up to 1,800 lbs (8kN)
• Speed: Variable up to 6”/min (2.5mm/sec)
• Battery: 14.4V NiCd or 14.4V NiMH
• Charger: One hour quick charge 110V (240V model available)
• Battery Capacity: Up to 30 cartridge sets (material dependent)
• Dosing Limits: Variable from 3 to 32 seconds
• Top load – drop in cartridge holder

Cartridge Compatibility:
• Nominal Size: 400ml
• L Dimension: 183mm
• A Capacity: 270ml
• B Capacity: 135ml
• Ratio: 2:1
• D1 Dimension: 36mm
• D2 Dimension: 51mm
• Strap Hook

Technical Specifications:
• Capacity: 13.5oz
• Ratio: 1:1 (200x200ml)
• Weight: 8.6 lbs (3.9 kg)
• Dimensions: 15.1 x 3.9 x 13.4” (384 x 100 x 341mm)
• Thrust: Factory set up to 1,800 lbs (8kN)
• Speed: Variable up to 6”/min (2.5mm/sec)
• Battery: 14.4V NiCd or 14.4V NiMH
• Charger: One hour quick charge 110V (240V model available)
• Battery Capacity: Up to 30 cartridge sets (material dependent)
• Dosing Limits: Variable from 3 to 32 seconds
• Top load – drop in cartridge holder

Cartridge Compatibility:
• Nominal Size: 400ml
• L Dimension: 183mm
• A Capacity: 200ml
• B Capacity: 200ml
• Ratio: 1:1
• D1 Dimension: 44mm
• D2 Dimension: 44mm
• Strap Hook

Technical Specifications:
• Capacity: 50oz
• Ratio: 1:1 (750x750ml)
• Weight: 15.3 lbs (7.0 kg)
• Dimensions: 30.2 x 6.6 x 16.2” (768 x 167 x 411mm)
• Thrust: Factory set up to 1,800 lbs (8kN)
• Speed: Variable up to 9”/min (3.75mm/sec)
• Battery: 14.4V NiCd or 14.4V NiMH
• Charger: One hour quick charge 110V (240V model available)
• Battery Capacity: Up to 30 cartridge sets (material dependent)
• Dosing Limits: Variable from 3 to 32 seconds
• Top load – drop in cartridge holder

Cartridge Compatibility:
• Nominal Size: 1500ml
• L Dimension: 215mm
• A Capacity: 750ml
• B Capacity: 750ml
• Ratio: 1:1
• D1 Dimension: 79mm
• D2 Dimension: 79mm
• Cartridge Holder Handle

Technical Specifi cations:
• Capacity: 30oz
• Ratio: 5:1 (750x150ml)
• Weight: 9.5 lbs (4.3 kg)
• Dimensions: 18.0 x 4.2 x 14.2” (458 x 106 x 361mm)
• Thrust: Factory set up to 1,800 lbs (8kN)
• Speed: Variable up to 6”/min (2.5mm/sec)
• Battery: 14.4V NiCd or 14.4V NiMH
• Charger: One hour quick charge 110V (240V model available)
• Battery Capacity: Up to 30 cartridge sets (material dependent)
• Dosing Limits: Variable from 3 to 32 seconds
• Top load cartridge holder

Cartridge Compatibility:
• Nominal Size: 900ml
• L Dimension: 215mm
• A Capacity: 750ml
• B Capacity: 150ml
• Ratio: 5:1
• D1 Dimension: 38mm
• D2 Dimension: 79mm
• Strap Hook

Technical Specifications:
• Capacity: 50oz
• Ratio: 1:1 (750x750ml)
• Weight: 9.5 lbs (4.3 kg)
• Dimensions: 18.0 x 4.2 x 14.2” (458 x 106 x 361mm)
• Thrust: Factory set up to 1,800 lbs (8kN)
• Speed: Variable up to 6”/min (2.5mm/sec)
• Battery: 14.4V NiCd or 14.4V NiMH
• Charger: One hour quick charge 110V (240V model available)
• Battery Capacity: Up to 30 cartridge sets (material dependent)
• Dosing Limits: Variable from 3 to 32 seconds
• Top load cartridge holder

Cartridge Compatibility:
• Nominal Size: 1500ml
• L Dimension: 215mm
• A Capacity: 750ml
• B Capacity: 750ml
• Ratio: 1:1
• D1 Dimension: 79mm
• D2 Dimension: 79mm
• Strap Hook

Technical Specifications:
• Capacity: 30oz
• Ratio: 2:1 (600x300ml)
• Weight: 9.3 lbs (4.2 kg)
• Dimensions: 18.0 x 4.0 x 13.9” (457 x 101 x 353mm)
• Thrust: Factory set up to 1,800 lbs (8kN)
• Speed: Variable up to 6”/min (2.5mm/sec)
• Battery: 14.4V NiCd or 14.4V NiMH
• Charger: One hour quick charge 110V (240V model available)
• Battery Capacity: Up to 30 cartridge sets (material dependent)
• Dosing Limits: Variable from 3 to 32 seconds
• Top load cartridge holder

Cartridge Compatibility:
• Nominal Size: 900ml
• L Dimension: 215mm
• A Capacity: 600ml
• B Capacity: 300ml
• Ratio: 2:1
• D1 Dimension: 51mm
• D2 Dimension: 71mm
• Strap Hook